Gas stoves fill the air in your home with particulate matter (pm), which has been found to increase cancer risk in the long term.

So next time you buy a stove, consider choosing an induction stove.

Btw, gas stoves being better or faster than induction is a myth. They have certain specific advantages, but they are actually slower.

Obligatory Technology Connections video:
https://www.youtube.com/watch?v=eUywI8YGy0Y

  • Aedis
    link
    fedilink
    412 hours ago

    Idk about my math but most American household circuits require stoves to be on a (220V) dual phase 18 amp circuit. Which should output around 8kW (18A * 220V)

    • gonzo-rand19
      link
      fedilink
      710 hours ago

      Should be a lot more than 18A. Should be closer to 30A-50A to account for usage. 18A is what a kitchen receptacle would require and is so low that an oven on a 18A breaker would trip constantly. I’m Canadian so I mostly know the CEC but the NEC requirements in the USA are very similar.

      More info if you’re interested.

      • Aedis
        link
        fedilink
        23 hours ago

        I was thinking of a single dual phase outlet. Is it also higher amperage as well as voltage?

        • gonzo-rand19
          link
          fedilink
          12 hours ago

          I have to correct you (sorry) when you say “dual-phase” because homes in Canada (my country) and the US don’t have dual-phase electricity and haven’t for many, many decades. What you are talking about is called “split-phase” and is actually just a single phase that’s been split using a neutral/return conductor.

          To actually answer your question, yes, it’s higher amperage and higher voltage. Every circuit breaker is really just a “tap” into the panel in order to create a parallel circuit at the applied voltage (usually 120V) and whatever amperage the breaker is rated for (after ensuring that you’re using the correct size of breaker, of course).

          The main reason why amperage is really important for larger appliances is because the cable used to plug them in (whether that’s by literally plugging it in or by hardwiring it into the panel) needs to be thick enough not to overheat from regular use. When precautions aren’t taken, it’s pretty easy for the cable jacket to melt (happens around 90 degrees C) and for the bare wires to eventually short and/or start a fire.

          Obviously, a 18A breaker would prevent this, but it would also prevent you from using the oven.