• @[email protected]
    link
    fedilink
    English
    881 year ago

    Check that the electrical power is off with a meter. Don’t trust that you shut the switch. Some really creative wiring or frayed wires can cause them to be unexpectedly live.

    • @[email protected]
      link
      fedilink
      English
      461 year ago

      I heard a story of a guy working on a high voltage, high current piece of equipment. He confirmed that the power was off. Just to be sure, he threw a big wrench at the terminals so they would short if they were still live. His wrench evaporated. Then they actually turned the power off. He lost his wrench, but saved his life.

    • @[email protected]
      link
      fedilink
      English
      131 year ago

      Non-contact voltage tester pens are cheap and made for this purpose. Don’t need a meter to measure. Just need to know live or not.

      • @[email protected]
        link
        fedilink
        English
        24
        edit-2
        1 year ago

        They’re also notoriously unreliable. Fine for casually looking for powered circuits, but if you’re going to touch the conductors at all, use a meter.

        As an electrician; it’s drilled into your head to use an actual physical-contact meter that you’ve just tested for function on a known good power supply.

        Some courses even demand you re-test the meter after you’ve checked the circuit you’re testing.

      • Raffster
        link
        fedilink
        51 year ago

        They are called death sticks for a reason. Always use a known working 2 point meter, and know how to use it correctly. That is the live saving tip here.

    • @[email protected]
      link
      fedilink
      English
      111 year ago

      And don’t let anyone close to the breaker box while you are working, my grandfather nearly died when some idiot turned the power back on for an industrial machine he was repairing. In his case both the elecrricity and the machine itself could have killed or disabled him.

      • @[email protected]
        link
        fedilink
        English
        51 year ago

        I believe that’s why a lot of machines now have locks, so the person working on it can lock the machine with a padlock and take the key with them.

        Looking around, it seems like some setups now have a lock per person doing the work, so no one can accidentally leave someone in danger.

        • chingadera
          link
          fedilink
          English
          61 year ago

          I remember the first time I saw lock out tag out proceedures, I audibly said “oh fuck yeah” involuntarily in front of a bunch of people I didnt know

          • @[email protected]
            link
            fedilink
            English
            21 year ago

            I was walking someone around once who basically asked “it looks like you could cut it”. I mean yeah… I guess. The point isn’t to make it literally impossible, it’s to make sure it doesn’t happen accidentally. The person driving the excavator could just decide to chase me with it to if they really wanted.

    • Otter
      link
      fedilink
      English
      51 year ago

      Would you have a video on how to do that

    • @[email protected]
      link
      fedilink
      English
      11 year ago

      I would say at least 20% of the water heaters I’ve replaced were not wired to the breaker labeled “water heater”. I only had to learn that lesson once.