The plug side that goes into the PSU is not standard.

The PSU is an EVGA 1600 G2 supernova.

How do I plug this in? I can’t find a compatible cable or plug adapter.

  • @[email protected]
    link
    fedilink
    English
    31 year ago

    There should be a switch that flips the input between 110/220 and you will need a different cable for the PSU

    • Admiral Patrick
      link
      fedilink
      English
      21 year ago

      Will that work for US split-phase “220” where the voltage is 110v on each leg? I was always worried that would fry the PSU since it’s not true 220V.

      • Max-P
        link
        fedilink
        English
        4
        edit-2
        1 year ago

        It’s functionally the same, it’s not fake in any way.

        It’s just a transformer that has 240V across it with a tap in the middle, and we take the two halves of it to make the two 120V lines. Combining the two 120V is really just using the whole transformer.

        You’d see exactly the same curve on an oscilloscope.

        • Cole
          link
          fedilink
          English
          11 year ago

          “220 V” is the “nominal” voltage. All voltages fluctuate depending on all sorts of factors, but should stay within a certain range of nominal. In the USA most utilities follow the ANSI C84 Voltage standard. 220 V is what electricians refer to it as. Your utility probably calls it “240 V”.