Not the time, not the place. As a Linux user seriously no, just no. People like you are the reason Linux users are seen as unhelpful and toxic, this is a codec issue not an OS issue.
At minimum, we would need AutoCAD, Microstation, and Projectwise. We also need these exact programs as our clients require our CAD submittals to be in specific formats.
We also need Bluebeam Revu for other client coordination.
It’s always funny with 3d. Graphics? You need Houdini? Of course it runs on Linux, it’s a UNIX-native program after all, first version ran on IRIX because what else would you use for 3d work but an SGI workstation and Linux is the commercial successor to IRIX. Blender, the same, just 5k bucks cheaper (and not everything is nodes, not yet). CAD? Everything’s suddenly windows-only because… how the hell did that came to be? Were they running 1990’s CAD software on Excel machines?
Neither Autodesk nor Bentley had a good economic reason to develop in Linux. Those companies also spend a lot of money on major clients to produce tools for them, which they then force all contractors to use.
I mean back in the days they should have been running on IRIX, and SGI switched over to Linux when they made the switch to x86 CPUs. Plenty of movie studios switched over to Linux workstations because of that, porting from IRIX to Linux is trivial compared to porting to Windows, why didn’t the same happen with CAD?
Wintel-PCs for the longest time just weren’t suitable for 3d work, they were office machines.
Both programs were developed to work on high end consumer laptops, which meant being able to work on IBM PC and therefore DOS.
Those programs also were likely 2D in their initial versions in the 1980’s. They were also competing against human drafting, which was considered to be industry standard at the time.
Cost and ease of use were likely more important than other potential users of 3D software, so they went with DOS and made the transition to Windows.
3d not being required makes a hell a lot of sense and of course it wasn’t people have been drafting on paper for ages. They might’ve ended up on Mac or maybe Amiga, but an SGI workstation is quite an investment when you don’t even need to spin polygons. IRIS GL dates back to the early 80s, doesn’t seem so much to be a timeline but price and need thing. And it’s not like you can’t have a 3d view without acceleration, just would take a while to render and a frame every five seconds might still be usable.
There apparently was an IRIX version at one time but with no user base preference, more likely they were thinking “where’s my C: drive” so once 3d acceleration hit the mainstream everyone happily switched back to Microsoft. Meanwhile you have 3d artists complaining that they can’t move windows with meta+lmb on windows.
Possibly Linux?
Not the time, not the place. As a Linux user seriously no, just no. People like you are the reason Linux users are seen as unhelpful and toxic, this is a codec issue not an OS issue.
Hmm, maybe they should try Linux then. Solve both the codec and the OS problem.
Read my username
It is for the memes
This is a work problem and a lot of software we use isn’t supported on Linux.
Possibly?
At minimum, we would need AutoCAD, Microstation, and Projectwise. We also need these exact programs as our clients require our CAD submittals to be in specific formats.
We also need Bluebeam Revu for other client coordination.
Thanks for the serious reply but I was just doing the “username checks out” thing
My username is possibly Linux so sometimes I just reply to random posts with possible linux as a joke.
I know, but my response sparked further discussion so it’s cool.
It’s always funny with 3d. Graphics? You need Houdini? Of course it runs on Linux, it’s a UNIX-native program after all, first version ran on IRIX because what else would you use for 3d work but an SGI workstation and Linux is the commercial successor to IRIX. Blender, the same, just 5k bucks cheaper (and not everything is nodes, not yet). CAD? Everything’s suddenly windows-only because… how the hell did that came to be? Were they running 1990’s CAD software on Excel machines?
Neither Autodesk nor Bentley had a good economic reason to develop in Linux. Those companies also spend a lot of money on major clients to produce tools for them, which they then force all contractors to use.
I mean back in the days they should have been running on IRIX, and SGI switched over to Linux when they made the switch to x86 CPUs. Plenty of movie studios switched over to Linux workstations because of that, porting from IRIX to Linux is trivial compared to porting to Windows, why didn’t the same happen with CAD?
Wintel-PCs for the longest time just weren’t suitable for 3d work, they were office machines.
Both programs were developed to work on high end consumer laptops, which meant being able to work on IBM PC and therefore DOS.
Those programs also were likely 2D in their initial versions in the 1980’s. They were also competing against human drafting, which was considered to be industry standard at the time.
Cost and ease of use were likely more important than other potential users of 3D software, so they went with DOS and made the transition to Windows.
3d not being required makes a hell a lot of sense and of course it wasn’t people have been drafting on paper for ages. They might’ve ended up on Mac or maybe Amiga, but an SGI workstation is quite an investment when you don’t even need to spin polygons. IRIS GL dates back to the early 80s, doesn’t seem so much to be a timeline but price and need thing. And it’s not like you can’t have a 3d view without acceleration, just would take a while to render and a frame every five seconds might still be usable.
There apparently was an IRIX version at one time but with no user base preference, more likely they were thinking “where’s my C: drive” so once 3d acceleration hit the mainstream everyone happily switched back to Microsoft. Meanwhile you have 3d artists complaining that they can’t move windows with meta+lmb on windows.