What is everyone else hosting? What am I missing?
Personal preference: Jellyfin instead of plex
Some that I run that you don’t seem to have anything for:
- Lancache (if you have several gaming PCs on the network or host any kind of lan party)
- surveillance camera software e.g. shinobi
- I see grafana, but other monitoring services like icinga, librenms, etc
- Mayan EDMS - I’ve found this really helpful as anything I get in the mail, I scan in, and this makes it all searchable and retrievable.
- There’s a whole hole you could dig if you start getting into home automation (I use home assistant)
So I do have a jellyfin instance, but for some reason it couldn’t play some video formats that Plex could. I haven’t looked into it in too much detail yet though. And definitely need to look into Shinobi or frigate! Thanks for the suggestions!
Check your encoding settings! Also if you use an iOS client, I highly recommend Swiftfin, as it seemed to support direct play on some files the Jellyfin app wouldn’t play at first. I’m still new to it too, but after I got my GTX 1080Ti set up on the right encoding settings, it’s been nothing but butter with everything I throw at it.
I’ve been looking at something for my cameras. I got Zoneminder running but configuring its behaviour was a nightmare.
All I want is to keep a limited rotating backup of a few cameras. Would Shinobi do that?
Shinobi or frigate are fine for that.
Frigate markets itself as “AI detection” but it isn’t required.
Also frigate is open source and.ahinobi is closed source.
Shinobi is absolutely not closed source: https://gitlab.com/Shinobi-Systems/Shinobi
Shinobi would absolutely do that if that’s all you want it to do. It’s definitely not a one-click setup either, though, unfortunately.
deleted by creator
Oh damn, that looks especially rad! I do run Home Assistant and pipe everything through a selfhosted MQTT server, so there are a ton of use cases I can think of for video detections being piped through MQTT for me. Ty!
What about Jellyfin do you prefer? I remember jellyfin not having the greatest hw encoding when I tried but that may be different now.
I use Intel Quick Sync and getting that to work with Plex through Unraid was a breeze. I certainly did not have the same experience with Jellyfin at the time.
I’m a huge supporter of open source, so Plex being closed alone makes it gross to me. Very little about Plex felt selfhosted.
I also like to tinker a lot and jellyfin lets me screw around with much more under the hood - precise encoding settings, dlna customizations, I’m sure there’s more but the primary driver was ideology. I’m not giving my money to some company that’s primarily developing features I don’t want so that I can use my own media to the fullest.
I’ve had very little issue with hardware accelerated encoding, but I already had the right drivers installed and on unix OSes that’s probably the hardest part
Thanks for the response! I think I’ll give it another shot when I get home. I’ve been procrastinating some of my home assistant projects so this is perfect haha
Wish I had the time/energy to host this much… Currently I’m running
- Plex
- Nextcloud (snap on ubuntu VM because its easy)
- pihole
- pivpn
I’m also running Jellyfin and Navidrome, in an attempt to determine if they are good alternatives to Plex for like 6 months at this point. See comments above about time/energy.
Jellyfin ftw
I didnt use any speciall features on plex, but for me the only advantage of plex was the abbility to have all movies/tv shows in one folder. After switching to jellyfin and *arrs the folder structure is sorted so I have 0 reasons to consider plex again
I love Jellyfin, but they need to sort their subtitle support out.
Idk is it jellyfin or bazarr (probably bazarr), but subtitles are working fine here.
I’m also dual running Plex and Jellyfin. Ive had a few files I’ve downloaded that Plex won’t play but Jellyfin will. I like plexs UX a smidge better but if more issues like that pop up I’ll be a convert
What is this dashboard?
This is awesome, thanks! Going to install it on my Odroid HC2 running OpenMedia 6!
Thanks!
Things I have that I don’t see on the list
- Home Assistant
- Frigate
- Mosquitto
- ESPHome
- Gitea
- SyncThing
- Weavescope
- Vaultwarden
- Keyper
- Kanboard
deleted by creator
What do they do?
Home assistant is a home automation hub that integrates with almost everything.
Mosquitto is an MQTT message queue.
Frigate is an NVR that works with many camera systems and offers AI detection
ESPHome is a platform for programming ESP32/ESP8266 based devices for home automation
Gitea is a self hosted alternive to GitHub and includes an action runner
SyncThing is a peer to peer sync tool that allows you to sync PC to PC, mobile to PC, and mobile to mobile.
WeaveScope is a tool for detecting and monitoring containers across multiple hosts
Vaultwarden is a rust-based alternative server for BitWarden
Keyper is a container that manages SSH key authentication in a great way
Kanboard is a kanban board
Do you run homepage next to HA?
I mean homepage looks very sleek and I had a sudden urge to set it up :-) , but tbh, having HA set up for both browser/tablet and phone, I don’t think I’d ever actually look at homepage…
I do, but it’s for a semi-unique situation.
I have Homepage running for my Work VLAN, without all the personal hosted stuff, and I am even thinking of building extensions for Homepage to add buildkite and JIRA so it better suits my work dashboard needs.
Thanks! Will look into some of these!
Awesome thank you, definitely a few there that I could make use of!
How hard was it to set up homepage to show all of this? This is very cool, well done
So there is a bit of a learning curve, but the Homepage docs are pretty well written. YAML is a bit of a bitch to work with though. Very similar to JSON and easy to read, but God forbid you aad some unintentional whitespace
Could you DM me the Homepage link? I’m not finding it among generic results. Yes, I’m a wee bit dim.
Here’s the GitHub link: https://github.com/benphelps/homepage
My Setup:
DOCKER
- Plex (never had good experiences with Jellyfin unfortunately)
- Radaar
- Sonarr
- Lidarr
- Readarr
- Jackett
- Prowlarr
- qbittorrent
- MariaDB
- phpmyadmin
- BookStack
- LibreNMS
- portainer
- watchtower
- pihole (2)
- Nginx
All running in docker on two synologys. Only other things I’m running is an old CloudKey for the Unifi APs and HomeAssistant on HomeAssistant yellow (pi cm4)
@chandz05 I’d totally add in Organizr to create a single page solution to access all of your various services. Beats bookmarks any day of the week
Y’know, I’ve played around with Organizr a little bit and didn’t quite like it. I think I had some trouble setting it up or something. I’ll probably go back to try it again at some point
I’ve been using doplarr with great success, one less port I need to forward/service to configure
I moved from Organizr to Homepage via Heimdall.
I had no end of issues with Organizr. It felt like something broke with each update and performance was pretty bad (not to mention some apps just not working with it). Seemed to be pretty common when I last tried it a couple of years ago, there were lots of similar complaints.
The good thing about Homepage is that the widgets mean you rarely have to go in to each app’s ui, so it actually saves me time.
What software is that?
It’s called Homepage. Not sure if I’m allowed to link to stuff here. But it’s basically a YAML based landing page for your self hosted apps
Thanks! I’ll check it out. (I don’t know the rules wel enough either.)
It’s called Homepage
If you have any smart devices in your home (and even many use cases outside of that) you could run “homeassistant” to pipe all your different smart devices through a common, extensible, scriptable interface.
Shinobi seems to be pretty lightweight though. I’m running it in an orangepi zero recording 4 cameras 24/7 and streaming their feeds with no hardware issues from the orangepi. Would frigate be able to run on light hardware?
I’ve got frigate running on a HAOS VM as an add-on. 2 cameras both running detection with only 2 cores dedicated to frigate.
Using proxmox on an old Intel 5960x, very minimal usage I’m sure you would see reasonable results on an orangepi. I guess make a backup of your SD / NVME before wiping and testing.
Been meaning to tweak detection as it’s a bit slow right now, wanting some automations built around person / presence detection utilising zone detection but it’s too slow right now.
Object detection will be a challenge, especially for multiple cameras. It’ll probably be fine if you have an Intel processor with quick sync.
I’m running Blue Iris on a Windows VM. I also have codeproject.ai on an Ubuntu VM with a Quadro P2000 for object detection (it also does Plex transcoding, the object detection doesn’t stress it very much).
My previous “home server” was a raspberry pi 4 running home assistant and motioneye for 2 cameras. It was able to handle it with a reasonable amount of headroom. That being said, I couldn’t imagine an SBC being able to handle object detection on top of that.
Plex Jellyfin Plex_debrid Lemmy Home assistant Home bridge Minecraft Valheim Librespeed
Whoa haven’t heard of plex_debrid until now. How is the quality with the streams? Can quality be controlled like how downloads are with sonarr/radar?
Yeah you can. The guy who makes it has done excellent work and has an active discord server. I love it.
One moment while I install 256 GB of ram
Could you share your settings file, or at least the background and icons? I love the aesthetic
Seconded, I’d love that Docker UI for my UnRaid NAS
Checkout Homepage in community apps! It’s configurable via YAML files
Awesome, thank you so much! Any chance you could share your YAML file or at least how to make them? Or does it make it fairly easy to learn how to configure it? Not at my computer atm so I can’t check myself, sorry
weird I have a 404 error on that link
Whoops, here’s the working one
thanks! I figured it was on my end since I was mobile using a new app! lol
Looks like Homepage (need GitHub link). The setup is pretty well documented with widget support. Background definitely would be nice though
Absolutely! I’m not home right now, but I can DM you my configs and background
Sure :)
I was searching for a Lemmy Instance in that mix 😅
You know, I considered it. But I would rather set that up on a VPS rather than something under my desk 😂
My list:
- Home assistant
- Jellyfin
- Lemmy
- Lidarr
- Pihole
- Prowlarr
- Radarr
- Readarr
- Sonarr
- Tdarr
- UniFi Controller
- Windows VMs for domain, and clustered file storage.
- Zoneminder
Good job, now fill the server :)
Haha trying my damnest!
