What’s the best way to play pirated windows games on Linux?

Ever since I’ve migrated I stuck to emulation for game piracy cause it was pretty simple. Ive been trying to run some repacked games but I can’t get them to install properly.

I don’t see many people talk about this probably because most game pirates use windows if I had to guess.

Edit: i fixed my problem, yesterday When running the fitgirl installer it would only show me two drives ,c and z, which were my home and root folder respectively. I wanted to install my game to a bigger drive, but couldn’t find the option to and assumed it was a problem with wine or the installer. A few hours ago I searched for a bit and found out I can add a drive to wine via winecfg -> Drives -> add drives. I ran the Installer again and this time it saw my bigger 1tb drive and everything went smoothly from there, ran The installer, added the game on steam, ran the game, all good.

  • @[email protected]
    link
    fedilink
    English
    152 months ago

    I wrote step by step instructions for installing windows repacks on linux using Lutris. https://sopuli.xyz/comment/9858101

    I install FG Dodi and Gnarly repacks and ElAmigos updates this way. I have only had weird bugs with ~5 that would only unpack in a Windows VM and 2 that needed native Windows (BG3 and Until Dawn) but tbh I have a feeling its an AMD issue not a wine issue

  • z3rOR0ne
    link
    fedilink
    English
    12
    edit-2
    2 months ago

    I recently got fitgirl’s Cyberpunk 2077 repack working on Artix Linux with Lutris by following this guide:

    It doesn’t take into account you also need to use GEProton as well (for Cyberpunk at least), but its easy enough to install GEProton via ProtonUp, and then just configuring the game to use GEProton in the settings via lutris.

    I got mangohud working as well, that was relatively simple.

    I also noticed that I needed to install and setup dxvk as an overlay for Vulkan.

    Yeah, it was a lot of setup and you need plenty of hard drive space as both the repack and the installed game are huge (have double the space available listed on the repack site).

    I have the game on Steam, but wanted to know how to do this, and it was not as bad as I thought it would be.

    • Estebiu
      link
      fedilink
      English
      22 months ago

      after a non-succesful attempt at installing fitgirls cyberpunk on my deck (through bottles), i downloaded dodi’s repack and it worked flawlessly. just pointing it out.

  • @[email protected]
    link
    fedilink
    English
    82 months ago

    Either Bottles or Lutris. Lutris is the popular way, but the Bottles fans swear by it. Either one will get you going, and neither one is usually difficult. There is the occasional game or app that is a little bitch though.

  • @[email protected]
    link
    fedilink
    English
    72 months ago

    Others mentioned good sources.

    I like to install in Lutris.

    If the game is not a Steam exclusive, you can get some help from Lutris-scripts, and if the game is a bit older, maybe even winehq appdb. Otherwise, ProtonDB (if the game doesn’t run but the recent reviews say to just hit play, look for older reviews).

    Most of the time, the issue will be .NET or vcrun (Majorgeeks AIO is easier than winetricks IMO)

    Barely had issues wich FG yet. She even has instructions for Linux. Limit to 2GB RAM works almost always.

    I had one game where I had to use the Lutris 7.2 runner and I had a diyferent game where a feature would only work with Proton.

    Newer Codex cracks don’t work.

    • Fleppensteyn
      link
      fedilink
      English
      32 months ago

      Does Lutris require some special setup?

      Using fitgirl repacks are a bit hit and miss for me. But if they don’t work, Lutris doesn’t help.

  • @[email protected]
    link
    fedilink
    English
    62 months ago

    I’ve tried all the ways, and Bottles was the easiest by far. Make a bottle for games from the high seas, using bottles’ preset for games. Once created change the wine from Soda to whatever you want or just use Soda.

    Then inside the bottle look for install dependencies and grab things like vc redist, and dot net. Once that’s done under the bottles’ UI choice “Run Executable” and chose the .exe for the game’s installer. If it doesn’t work as expected, click the cog/gear and select the checkbox for “Run in Terminal” to see where it goes wrong and search online for what fix is needed.

    The only time I had to troubleshoot with terminal, was for a mspatcha.dll problem. It was an easy fix: the bottle has a Legacy Wine Tools > Configuration > Libraries, where I found mspatcha listed, then changed it to “Native then Built in.”

    Hope that helps.

  • @[email protected]
    link
    fedilink
    English
    52 months ago

    A lot of repack installers won’t work in Linux, not even with proton. Use the original scene release instead if you can.

    • @[email protected]
      link
      fedilink
      English
      92 months ago

      I’ve been installing dodi, elamigos, fitgirl repacks for a while and still have to find one not working. Dunno what repacks are you installing.

      • @[email protected]
        link
        fedilink
        English
        3
        edit-2
        2 months ago

        I’ve tried a number of fitgirl ones and had only around a 50% success rate with them.

        • @[email protected]
          link
          fedilink
          English
          22 months ago

          Yeah fitgirl doesn’t work well with translation layers. In my experience elamigos works the best out of all repackers.

      • @[email protected]
        link
        fedilink
        English
        22 months ago

        i tried many different cyberpunk 2077 repacks from dodi and fitgirl and none would finish installation with wine

        • @[email protected]
          link
          fedilink
          English
          4
          edit-2
          2 months ago

          Try the jc141 repack. It worked for me. It’s a linux repack so I think their script handles the wine stuff.

          • @[email protected]
            link
            fedilink
            English
            12 months ago

            apparently his repacks are for arch, fedora and debian unstable. no setup provided for ububtu based, so that’s a nope then.

            • @[email protected]
              link
              fedilink
              English
              3
              edit-2
              2 months ago

              Yes. You can make it work but it’s just too much work to support it. Gaming needs cutting edge releases.

              Check which version wine you are running. It could be the main problem.

      • Zos_Kia
        link
        English
        12 months ago

        I’ve only had issues with fitgirl repacks i think there’s an optimisation they use for low RAM machines that doesn’t play well with proton

  • @[email protected]
    link
    fedilink
    English
    42 months ago

    Bottles. It’s the best click and play experience imo. Select the gaming preset and use wine-ge or proton-ge as the runner (default is soda which is not really good) and you are good to go.

    Sometimes the installers don’t work correctly on proton-get so use system installed wine and you are good to go.

  • @[email protected]
    link
    fedilink
    English
    32 months ago

    I’ve just used wine or wine ge. Some games don’t work as well as others. If you want better compatibility adding games to steam or lutris might help if you can use proton

  • @[email protected]
    link
    fedilink
    English
    32 months ago

    Running the installer with wine first and then adding the game exe as a non-steam game and running it with proton works for me.

  • @[email protected]
    link
    fedilink
    English
    32 months ago

    I just switched over to using heroic launcher from lutris, its prettier and a smoother setup IMO. I have had issues as well installing some games from fitgirl, the install always failed. However they would install on windows just fine. So I did that then copied over the install files to my Linux hard drive and setup them up in heroic launcher.

    I’ve only had to do this with 3 games from fitgirl, maybe I’m missing something but I could not get these 3 games to install on linux. This is why I keep a hard drive with windows installed on it :)

  • bruhSoulz
    link
    fedilink
    English
    22 months ago

    Im not an expert at all but can i know what actually goes wrong? I usually just type wine gameinstaller.exe and it does its job, then i add the executable to nonsteam games. Just curious

    • @[email protected]OP
      link
      fedilink
      English
      12 months ago

      Yesterday When running the fitgirl installer it would only show me two drives ,c and z, which were my home and root folder respectively. I wanted to install my game to a bigger drive, but couldn’t find the option to and assumed it was a problem with wine or the installer. A few hours ago I searched for a bit and found out I can add a drive to wine via winecfg -> Drives -> add drives. I ran the Installer again and this time it saw my bigger 1tb drive and everything went smoothly from there, ra. The installer, added the game on steam, ran the game, all good.

      Maybe I’ll add this to the post in case anyone wants to know.

      • bruhSoulz
        link
        fedilink
        English
        12 months ago

        Sweet 😎 thx for the update might come in handy

  • Binette
    link
    fedilink
    English
    22 months ago

    I should’ve asked the question earlier. Thank you so much!