• 2 Posts
  • 20 Comments
Joined 1 year ago
cake
Cake day: September 28th, 2023

help-circle


  • Boring@lemmy.mltoSelfhosted@lemmy.worldNetwork upgrades checkin
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Ooookay… Took me a second to wrap my head around the layout… Originally I only looked at the picture, which only shows a single switch.

    This is an odd topography. Typically when working with switches, you want them connecting directly to the router and not connected to another switch.

    You are going to have bandwidth issues out the ass, along with having a troubleshooting nightmare when something goes wrong and you need to trace packets.

    Right now you have a hub and a spoke inside a hub and spoke.

    Since it looks like your Asus is just an AP in this scenario, you’d be better off:

    • hooking both switches to the ISP router
    • enabling DHCP on the ISP router for the 2.5g switch
    • set your 1g switch to a different subnet, with default gateway to your ISP router
    • enable dhcp for different subnet
    • add Asus for WiFi ability on new subnet

    You can then play around with VLANing on the managed switch. You won’t be able to separate IoT and Personal WiFi signals with VLAN. Youd need to create a guest SSID for that functionality and change the channels to 6 and 11 so you get good bandwidth

    Edit: this is assuming you have a layer 3 switch, if its a layer 2 I would use the Asus as a router/AP and hook it directly to the ISP router and hook the switch up to the Asus.



  • Boring@lemmy.mltoSelfhosted@lemmy.worldNetwork upgrades checkin
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Looks like it’ll work. You should look into flashing that router with openwrt or pfsense and VLANing off those smart devices… They can be a security issue.

    Also adding a second AP that you place on a different channel for guest and untrusted devices would work and increase bandwidth, but adds some routing complexity.



  • Yea, I haven’t played with it too much. You’ll ever have to host your own SMTP server to send it or use gmail or protons SMTP service.

    Doing it yourself might cause big companies to send your mail to spam or possibly just drop the packets cause you’re not using a trusted IP, have the wrong DNS settings, etc. and your ISP may even block port 25

    This can be circumvented by using a SMTP relay service but can still have some issues like mail sending limits.


  • I would have a failsafe, like use a major email provider for emails that you need to go through for like work order government stuff.

    Hosting your own email is a great learning experience and is fun to do; but your emails will get marked as spam, you’ll have to constantly perform maintenance, and have major reliability issues.

    Most of the issues youll have are fine for personal use, but is dicey if you plan to migrate 100%

    Edit: receiving email is less of an issue of sending. The forwarder should be reliable, however, its the sending from the forwarding address that would possibly be an issue.



  • Boring@lemmy.mltoSelfhosted@lemmy.worldRemote desktop
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    No only the server, you can host an openssh server and have clients connect remotely.

    Sorta like how you can host a webserver and a client doesn’t need 443 open. Except a reverse shell is possible with ssh, allowing a client to be controlled without their port 22 open.









  • Subnetting and VLANs can get hard to conceptualize when they are virtualized on a single machine.

    I’d suggest going to draw.io and making a logical network diagram so that you can have a reference when setting up your network.

    If you want EVERYTHING going through piHole which is on a different subnet, easiest way I’ve done it was make going through the pihole necessary to make it to the default gateway.

    But if you have a different situation for pihole you can set up DNS relays.





  • I use keepassXC and sync across my devices with nextcloud and VPN to my home network with wire guard and this setup has never failed me.

    I’ve toyed around with passbolt, and I really want to try because it just looks cool to me, but I keep having trouble with it playing nice with my reverse proxy.

    My personal preference is hosting it myself on my own server and using a VPN to get to it. It gives me peace of mind because I’m not a big enough target for someone to try that hard to get my passwords and I’m not exposed to bitwarden or dashlane getting breached.