I can’t belive she’s cheating on me! Especially after I sent her all that money!!!

Your plan A shouldn’t be plan B. It should be plan C or D. Although the D would be why you’re taking plan B. So maybe plan B or C. But I guess it’s called plan B. I guess you don’t have to read this post now.

YES I FUCKING WOULD!

Trust me, you’re good enough. Somewhere out there, there’s a drummer who isn’t sure if they’re good enough, and a bass player, singer, etc. Find some like-minded musicians and see where it takes you. I’m not suggesting going thru craigslist and replying to everyone looking for “experienced shredder” or whatever, but there are people out there in the same situation you are.

I laughed way harder at this than I should have

I had this happen on my p1s with a roll of Inland pla, but not with a roll of their pla +, I also noticed my nozzle was worn (who knew that after 850 hours you should probably replace it). Haven’t gone back to the normal pla yet, but those might be things to look at?

Yee-haw’n

(Cough) Asking for a friend

Portal gun

Every. Fucking. Time.

Efficiency and progress Is ours once a more Now that we have The neutron bomb It’s nice and quick and clean And gets things done…

No! The water should be totally dry.

Can’t recommend a filament dryer enough, this is a great tip. The AMS itself helps keep your filament more dry longer than being exposed to the elements, but you really should consider a good dryer.

As far as nozzles go, mind the filaments you plan to use with them, as a .2 nozzle is way more likely to clog with “filled” filaments, but if you’re printing non abrasive, non filled filaments and you want the extra detail you can’t beat a .2 - i purchased the CMYK lithophane kit and the detail with the smaller nozzle makes them almost photo quality. The great part is, though, bambu nozzles are far simpler to change than most other printers. If you plan on swapping them often, I’d recommend printing the cable/connector removal tools as the connectors can be a bit fiddly.

You can get both Bambu and Orca skicer(s) from the AUR if your distro is arch-based or a flatpack of either if you’re Debian based if that’s your main concern, but from what you’re saying you’re more interested in the “open-ness” of the platform. I’ve never owned a Prusa myself, but I’ve seen them in action and was very impressed. I currently run a P1S and daily-drive Debian now and couldn’t be happier, but iI do understand the concerns people have with Banbu. Sounds like you’ve done your research, and if the Prusa ticks all (or the majority) of your boxes, is local to you and you don’t mind the price tag, I don’t think you’d be disappointed at all.

Oh good call, that’s a possibility. also, I’m not familiar with non-steel strings, is it possible that something delaminates in nylon ones?

We use freedom units, where everything is measured in cheeseburgers.

Looks like the nut is pretty worn, check 1st fret action across all strings? Any hidden cracks in the wood? Have you checked for loose screws, either mounting the tuners, the tuning gears or the tuning pegs themselves? I’m more of an electric guy, but I’d start there and see if the problem reveals itself.

I usually throw some condoms in my cart to make the ski mask, duct tape and shovel seem less embarrassing

Whatever the stock one is for Galaxy phones lol. It’s properly “Minnesota-d” now

The three days a year where you can…

Fuck it, I got nothin.