You must log in or register to comment.
There’s a third, where the first person puts on thingiverse and we do it for fun without owning the actual unit
Isn’t that just selling?
China mastered copying things well. A five pack of replacement knobs that actually match is $34 on Amazon. A crappy homemade knob for a $4000+ range is crazy.
China has also mastered modern slave labor. That someone makes thier own replacement instead of ordering some small uncomplicated part from across the globe isn’t crazy, it’s self-reliant and smart.
But that’s, like, just my opinion man.
And Bosch makes and generally stands by their good products. Yeah they’re a company, but they’re not the worst!
Also, where did original knob go, I need to know.
So one is creative and solution seeking and now proud about himself and an inspiration to others and the other one – not, but just a thief.
If the knob on your stove breaks while it’s still new enough to be sold on the floor of a Home Depot? Yeah, the theft wasn’t by the guy who took the knob.
If the knob of your new-bought stovebreaks to talk to the seller or the manufacturer and request a new knob if it was a manufacturing problem. You don’t go around and steal knobs from innocents.
Home Depot is not innocent.
-Anti-union
-Massive donation and lobbying efforts to Republicans and Democrats (but they definitely go harder with Republicans, if you look at the numbers, and they’ve donated specifically to white supremacist candidates)
-Underpaid employees
-Violated the National Labor Relations Act NLRA
Fuck 'em
Shoplifting is a noble crime.
Just a thief?? That’s creative, solution seeking, and ecologically conscious problem solving right there
Ecologically conscious would have been getting it from some shop that fixes and recycles appliances.
Those stopped existing when it became cheaper to just throw the whole thing out and buy a new one
He’s an active initiator of the broken windows theory and thus not only a thief but acting anti-social by destroying virtues and morale and thus social safety, coherency and teamspirit. He’s a selfish sociopath.
Broken Window Theory is a load of bollocks: https://cssh.northeastern.edu/sccj/2019/05/21/researchers-debunk-broken-windows-theory-after-35-years/
He’s a selfish sociopath
Sure, being a thief is bad, but one case of theft doesn’t instantly make him a CEO.
Yes, he’s just a thief. The ends don’t justify the means. I can’t believe that needs to even be said.
That’s a humongous oven, must be a 10+ person household.
And yet it runs with gas, as if we’re still cavemen cooking meat over open fires.
Its the cheapest ¯\_(ツ) _/¯
90cm.
We have one for our 4 adult, 2 kid household. Its amazing how often it’s not big enough for all sorts of things.
I think 2 X 60cm ovens make more sense in hindsight and they also dont take as long to heat up
Or its the house people designated as the holiday house, maybe! Only actually used fully a few times a year.
That’s my house. We have dual ovens and use them simultaneously several times a year, mostly holidays.
My oven is so old I came across an identical one in an e-waste pile behind a store. I stole the timer knob and mechanism so I don’t need to keep using the broken one (manual only) anymore.
You didn’t steal it, you 💫recycled💫.
*Reused, which is preferred to recycling even if the materials are 100% recyclable.
That’s what I told to the store employee I encountered coming to work via the back door. He wasn’t too happy but ultimately let me do it.
Thats going to be a squidgy mess after a long cooking session. Hope he doesn’t get plastic burns.
I think something might be wrong with your oven uh… my knobs don’t get anywhere near the glass point of PLA when I’m cooking something.
I’ve always got a spool of high temperature PLA for that, good for up to 140°C.
I don’t have a setup for ABS/ASA and been looking for affordable HT alternatives. Not sure how I haven’t heard about this.
2.5x the price of PLA where i am, but not like I have better options on hand.2.5x the price of PLA where i am
Yep, I usually print drafts in normal PLA and only the final part in the high temp stuff, but 2.5x is often still better than buying something if there’s even a solution available. So, fine for me in edge cases.
YOU WOULDN’T STEAL A BOSCH OVEN KNOB
Now you can
DON’T TELL ME WHAT I WOULDN’T STEAL
When an artificer and a rouge are faced with the same problem.
Edit: my english sucks
What does makeup have to do with this?
Rogue is not spelled rouge.
I think you replied to the wrong person. They know.
DM: Roll a D20 for a stealth check.
Rouge: I bat my eyelashes.
DM: Huh, I misread your character sheet. I’ll allow it.I feel like an artificer would be skilled in the application of rouge. As well as foundation and eyeliner.
*eyeliner
I’d eyeball the measurements in Blender and laugh at my crooked knob every time I use the stove.
You’re still putting too much work into this. Just heat up the metal shaft where the knob was with a torch and press any old hunk of thermo plastic onto it. Now you have janky done even more quick and cheap.
I laugh at my crooked knob all the time.
I also laugh at it.
That’s at least better than his wife. She laughs and points.
What about the old vice grips that are now a permanent part of the stove trick?
Nothing is more permanent than a temporary fix.
Man, all the sinks I’ve seen over the years with vice grip knobs haha.
Channel locks, adjustable wrench, or plyers are also acceptable. Plus then ya know damned well where they are.
This is why I always buy cheap vice grips whenever I see them in a box of tools at an estate sale or something.
“Oops, I broke a handle on (thing).”
Clamps vice grips on the bit left over
“Fixed it.”
Right now both of the seats in my truck just have a vice grips for the reclining lever.
I had my shower knobs as vice grips for a long while
I simply pulled the knob off in the store & shoved the rest of the stove up my butt, later at home I printed the missing knob. It’s a simple life-hack, basically everyone is doing it.
Is this why your meatloaf always smells funky?
Me too I enjoy putting my meatloaf in Evil_Shruberry oven
It brings all the funky people to the yard tho
I hate that as a society it is somehow ok to steal for your convenience. Its the same thing with lots of other things as well. Don’t you just love it when you buy a product only to get home and find half of it was stolen?
You mean like US healthcare insurance?
A while back I would use those local secondhand auctions that mostly dealt in amazon returns. (As opposed to directly buying from amazon.)
I’m surprised how everything would be intact for a lot of items, but most commonly if I got bamboozled, it was something like, everything is fine except for missing a set of screws, or a single crucial knob or something.
People literally will just order the same thing again, pull the part they missed, and instantly return it. Which is especially scummy when it’s no longer a secret these returns just get destroyed or incinerated for no reason.
It’s just disgusting consumer-brain behavior. (Amazon, of course, being sheer evil, enjoys the market advantage of a “no questions” return policy.)
If it was a very specialty piece beyond a simple hardware store run, a lot of times I’ve been lucky enough to politely contact the manufacturer of a thing, sometimes I tell them I got it as a gift so they don’t ask for a proof of purchase. And they’ll just send me the missing bit. Free. Super simple. The most I had to do was take a picture of the model tag.
The fact that this was too much for people to bother with grosses me out.
I really appreciate that ikea instead has no questions asked small hardware replacement. Had a bed in my storage unit for years waiting for summers to kill the old landlord’s “pets”. Unfortunately in that time some important bolts rusted. Made me not need to throw the whole thing out
If Amazon was a legit normal business this wouldn’t have worked and everything would have been processed. As you said, sheer evil
mademakes this.Not to say this behavior is okay, but there are some companies that also just exploit the alternative to high heaven, like the post shows. You can pay $20 for a 12 cent replacement part, or order one and return it. Some people will pay for the part, but significantly less will when it costs and arm and a leg for something so cheap.
Wes Watson over here.
Still cheaper than getting a 3D printer and filament and stuff. And CAD/CAM software.
The type of person to do this most likely already has a 3d printer, and cad software is free for personal use. The electricity and filament cost for this part would be a few cents and it would take minutes to print on modern printers
Even if you didn’t have a 3d printer it would be significantly cheaper to use a 3d printing service to order the part, than to buy OEM replacement knob
It’s true that you should not expect to save money in the short or long run with 3d printing as a hobby, but if it’s your thing then it’s nice to have a hobby that’s occasionally useful. Also, autodesk fusion is free for consumer use.
I wouldn’t say I’ve made back my investment on 3D printing in the past half a decade I’ve done it. But in terms of “prints for friends” like this one above I may be close. Plus there’s just something nice about going “I need a measuring cup for dog food” and printing one to the exact serving size.
What food-safe printing materials do you use?
I just use PLA. PLA itself is good safe, but occasionally the additives aren’t, so I don’t use any for human related stuff. It’s also worth considering that the layered approach can allow for bacterial growth, so unless you treat it (e.g. epoxy seal it), you’ll need to wash it fairly frequently to curb buildup.
That frequent washing is what leaks out the nasty chemicals from the plastic fyi. Heat and mechanical stress are the main way plastics leach
To be fair, that’s the case with pretty much all plastics.
Tupperware shouldn’t be used to reheat food in the microwave for the same reason, yet that’s it’s most common use generally.
Untreated PLA is more brittle than commercial food-safe plastics though, that is true.
If you do not have a 3D printer and CAD software, you are 100% right.
If you already have those things like OP, then why not just design / print one? I am also a 3D printer / CAD person, and I love designing replacement parts that are wither too expensive, or often impossible to find. Mostly though, I design and print things that make my and my families lives easier / nicer / more convenient. And they are customized to the exact item and function, something that you would most likely never be able to get in a store or online.
Stove Knob guards. https://www.printables.com/model/278668-stove-knob-guard
Salt / Pepper Grinder Holder. https://www.printables.com/model/155219-salt-and-pepper-grinder-caddy
Spice Jar Organizer. https://www.printables.com/model/151171-spice-jar-spacer-organizer
Just to name a few things.
Software is free if you aren’t using it for commercial use. Fusion 360, onshape, etc. are all free for personal use. And that’s assuming someone didn’t make it already and share it free.
Filament costs $17 for 1kg of perfectly fine plastic. You’d probably use 100g at most for this, so $1.70.
A Bambu A1 mini is $200, and is a modern, high quality printer that would be fine for this project.
So you only need like a half dozen of these projects to come out ahead.
On software SIDE, kinda criminal not to mention FreeCAD, it’s FOSS and runs on Linux, unlike the non-free freemium and paid alternatives
But it’s got a long way to go before it’s at usable as the others. Definitely not a good place to start learning cad.
No, it doesn’t.
The recent 1.0 release is actually very good. It is probably better at this point than some of the entry level commercial options and most importantly compared to those is not intentionally hobbled in any way.
The time for everyone to stop parroting how “everyone knows” that FreeCAD is unusable is… now. You can go ahead and delete that one; it’s time to learn a new soundbyte.
Come on. The 1.0 release is a huge milestone, but saying it’s better than the entry level commercial options is just disingenuous.
I have actually switched over to it because I run a small 3D printing business as a side income, which isn’t nearly profitable enough to afford an onshape license, and although Fusion360 has an affordable startup license it simply won’t work on Linux and my hackintosh laptop isn’t powerful enough for cad.
It is at a point where it is very usable if you are willing to invest the time needed to learn it, but the learning curve is much, much steeper than that of OnShape or Fusion360, especially if it is your first CAD program. There is also a huge lack of beginner tutorials for it, and the documentation is intended for advanced users, which complicates the learning curve even further, because Fusion360 and OnShape have a huge amount of beginner tutorials for them.
For a hobbyist that just wants to model a few things and not sell them I would always recommend OnShape or Fusion360 over FreeCAD, or even Tinkercad if said person just wants to model extremely simple things.
Is it much different from 7 months ago?
Yes. The 1.0 release was in November. That Ondsel fork in your video was based on, I believe, the 0.22 version.
The 1.0 release actually prompted Ondsel to shut down entirely, as they are now largely redundant and attempting to monetize a FOSS program was probably doomed from the start anyway…
That’s good to know, I guess I’ll give it a try again.
Nah it’s a great place to start learning, it’s super easy to start modelling your first simple models in part design.
It’s the more complex designs where it starts to struggle (or maybe I’m just bad idk)
Nah it’s not you, FreeCAD is perfectly usable for something like the above referenced knob but even mid-size assemblies really have problems. I personally find the workflow to be bad and irritating beyond my ability to express in words and I can’t imagine how frustrating it would be as a new user to work it out for yourself while at the same time getting used to thinking of objects as collections of operations. It’s a great lightweight program for people who already know what they’re doing and that value FOSS, though. 1.0 really fixed a ton of the issues, but it still has the “Blender UX” problem that seems to plague all big FOSS projects…
To be clear, I’m the last one to say one shouldn’t invest in money saving innovation. But the breaking even should be number one priority. I, for instance have all kinds of energy savers in my house that have cost me several hundreds. They’ll only be returned in a few years and I need to manage them properly.
One doesn’t buy a 3D printer to make a knob. One is suddenly presented with a need for a knob (or a thingy, or a flangle, or a twizzlet…) and suddenly remembers, “hey - I have a 3D printer.” Followed by “I wonder if there are any matching designs in one of the several massive free databases of models.”
Followed by getting out the calipers and opening OpenSCAD
I wish I had pockets big enough to replace the flimsy Bosch drawers in my fridge that start to shatter as soon as you pull just a tiny bit harder than normal.
There are 3d models for some fridge drawers. I have a Frigidaire with similarly flimsy drawers and found a model for them.
